M18 PRO chassis set in stylish blue graphite finish. Includes CNC-machined blue graphite parts (chassis, top deck, battery brace and top bumper brace), molded composite parts (battery holders, rear shock lower mount) and mounting hardware. 

M18 PRO chassis set in stylish silver graphite finish. Includes CNC-machined silver graphite parts (chassis, top deck, battery brace and top bumper brace), molded composite parts (battery holders, rear shock lower mount) and mounting hardware. 

High-density front foam bumper, blue in colour. 

CNC-machined alu heat sink for Super Size motor, blue color. Clips onto motor easily and provides extra cooling. Fits Super Size 300 and 370 motors, Team Orion Big Block motor, and Team Orion Baja modified motor. 

Set of four composite suspension arms includes 2 lower arms (front/rear), 1 front upper arm, 1 rear upper arm. Two complete sets will replace all arms on M18. 

Set of 2 molded composite front upper suspension arms for XRAY M18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6° caster vs. 12° caster stock). These arms provide improved steering, better handling into and out of corners. Highly recommended for serious racing and high competition… prepare to drop your lap times! 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front left steering block also fits rear right on M18 and on M18T fits front right and rear right. All hardware is included. 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front right steering block also fits rear left on M18 and on M18T fits front left and rear left. All hardware is included. 

Handy composite tool for use on 1/18 wheel nuts. 

Set of six linkages and ball joints includes center linkage, steering linkage between front steering blocks, rear toe-in linkages 4°, ball joints for front steering turnbuckle, and shim that is used between the left suspension block and servo linkage. 

Alu adjustable ball differential for M18 allows you to fine-tune the handling characteristics of this already great-handling micro racecar.  

Front one-way differential for M18 allows you to fine-tune the handling characteristics of this already great-handling micro racecar. Allows for quicker steering but decreases braking performance, since only the rear wheels will brake.  

CNC-machined drive shafts with hex adaptors are made from tough, high-grade T6 aluminum and high-strength steel pins and fasteners. Ultra-smooth operation, high-precision design and fit.  

CNC-machined alu micro wheel axles for drive shafts with hex adaptors are made from tough, high-grade T6 aluminum. Ultra-smooth operation, high-precision design and fit. Provides extra strength for use with high-performance motors. Features 1.0mm offset for wider track-width.  

CNC-machined alu micro wheel axles for drive shafts with hex adaptors are made from tough, high-grade T6 aluminum. Ultra-smooth operation, high-precision design and fit. Provides extra strength for use with high-performance motors. Features 2.0mm offset for wider track-width. 

Graphite main driveshaft for M18/M18PRO made from top-grade graphite material is a direct replacement for the standard aluminum driveshaft. Lighter rotating mass (55% lighter as the alu driveshaft) results in much quicker accleration and precision balancing gives vibration-free running. 

High-performance 13 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 14 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 15 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 16 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 17 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 19 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 21 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

High-performance 23 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation. 

Nickel-coated 4.2mm pivot ball (type C) fits M18 and NT18. Qty of 8. 

Nickel-coated 5.8mm pivot ball (type A) fits M18 and NT18. Qty of 16. 

Nickel-coated 5.8mm pivot ball (type B) fits M18 and NT18. Qty of 8. 

Optional springs, stiffer than kit springs. 

The XRAY M18 Power Pack Pro includes high-performance electronics specially designed for the XRAY M18. Includes XRAY XMC300 v2 ESC with brake, XRAY XMS01MG high-quality micro servo with metal gears and XRAY 370 Super Size motor with integrated capacitor board. 

Pre-assembled 6-cell (7.2V) "shotgun" style battery pack made from high-performance 1100mAh NiMH cells. Includes pre-wired micro connector and high-grade wiring. 

Cable with universal micro plug for charging XRAY Micro Battery Packs. 

Micro cables with "fast on" connectors replaces the connectors on older 300 micro motors. Designed to work with the #389182 XMC300R ESC. Set of two, colour-coded for easy identification. 

Battery cable with micro connector for micro battery pack. Pre-wired with high-quality silicon-insulated stranded wire, pre-tinned ends. 

New premium 370 Supersize Micro Motor give 30% better performance (more power, more punch) than original 300 Supersize Micro Motor. Factory pre-assembled with surface-mount capacitor circuit board (no capacitors to solder), special noise filter, and pre-installed wires.  

The XRAY XMS02MG micro servo with metal gears has been specially chosen for the M18 micro racecar because of its high precision, long life and high quality. 

XMC300 Electronics Speed Controller (ESC) with brake has been specially designed for the XRAY M18 micro racecar. Based on SMD technology, the result is a very small high-quality electronic device.  

Mounted rear foam tires (40deg - medium) on solid dish rims for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original wheel mounting system. Set of 2. 

Mounted front foam tires (45deg - medium) on solid dish rims for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original wheel mounting system. Set of 2. 

Popular F360 body that comes stock in M18 kit. This 150mm clear Lexan® body with protective film comes with window masks, decal sheet, wing and hardware. Fits perfectly M18. 

A street racer favourite! This 150mm clear Lexan® body with protective film comes with windows masks, decal sheet, wing and hardware. Fits perfectly M18. 

Own and race your own exotic Lago supercar! This 150mm clear Lexan® body with protective film comes with windows masks, decal sheet, wing and hardware. Fits perfectly M18. 

The 956 defines the words ‶high-performance.※ This 150mm clear Lexan® body with protective film comes with windows masks, decal sheet, wing and hardware. Fits perfectly M18. Perfect high-downforce racing body. 

High-quality clear Lexan® F360 micro body specially designed for NT18 features extended sides for covering muffler. Also fits M18. Comes with full-colour decal sheet. 

Solid dish rims for rubber tires. Wheels for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original wheel mounting system. Set of 4 (front and rear). 

Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls.  

High-precision axial thrustbearing for 385001 Alu. Adjustable Ball Differential for the XRAY M18. Carbide diff balls, and highest-quality materials and design guarantee the smoothest differential operation and increased life. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x10x3. Set of 2 pieces.